Characteristics of Allergic Harvest PC

The thickness of this substance is 4 mm.

If you want, you are able to raise the distance of the construction to 6 metres or more. To do this, it’s enough to attach a two-meter extension. When choosing a drawing, then focus on the space between the arches. This figure should be 65 cm, and which is the most appropriate length for the specified thickness of this substance. The diameter of the doors based on the manufacturer’s drawing is 90 cm.

Before building a polycarbonate greenhouse, then it is necessary to select a spot for its place. If this is done correctly, it is possible to provide yourself with a crop of fresh vegetables for the whole calendar year.

The place for your future greenhouse is marked immediately in the preparation of their garden plot. So as to melt the snow in the place of their greenhouse as early as possible, the ideal point on the site is going to be a small elevation. Furthermore, in such a place will not have to worry about large humidity as soil and air inside the structure.

Build a polycarbonate greenhouse in an elevated site – means to care for the best temperatures indoors.

If it isn’t feasible to put a greenhouse in an elevated place, you will need to pour a coating of fine crushed stone around 20 cm and the identical layer of fertile land to create seedbeds.

Before assembling a greenhouse in your backyard plot, it’s also wise to think about where and how this construction will be installed. First, you have to pick a place for this. The greenhouse ought to be found at a metropolitan region no less than a few meters away from homes, barns and other structures.

How to Put in a greenhouse according to the sides of the world

Make sure you level the soil surface – it is ideal to even remove the surface. This can also get rid of weed seeds. And for ease of work, eliminate the soil in an area that is around a meter wider on both sides of the rectangle you desire.

It’s also worth thinking about having a foundation. As manufacturers say, today most greenhouses do not need it, particularly if they (greenhouses) are employed just in the summer and spring period. But, seasoned anglers still recommend earning a basic basis from a pub. It’s extremely simple – it’s enough to link with each other using metal corners and screws four parts of wood with a cross-section of 10 * 10 cm. The size of such a base ought to be equal to the foundation of the upcoming greenhouse.

Simple bar foundation

You could even make a strip foundation of concrete. He is more reliable than a bar base, but requires more financial and labor costs. By the way, the greenhouse, that is utilised in the winter, with no and do not do with it whatsoever.

Stages of the formation of a strip foundation: a schematic representation

Many manufacturers advise to install greenhouse structures without even building a foundation. For this function, they equip the frame with specific T-shaped legs, so that the structure was firmly fixed. However, as practice shows, it is still required to construct a foundation: so and the foundation will be more rigorously fixed and the components of the basis that are in contact with the ground, will be saved much longer in its initial condition.

The most important issue is to take care of the material with special agents to protect the wood from moisture. The material is installed on concrete blocks that are dug into the soil. To get a six-meter structure, they want 10 pieces: four to each side and one in the middle of the endings.

Before you do the greenhouse , you will need to choose the best location for this. It must be an even site, so that the framework was found evenly, without distortions. It should be bright and never obscured by buildings or trees.

Leave a comment